Roll Media

Coloured media, printable media and laminates

Welcome to a world of high-quality roll media and vibrant coloured vinyl for all your creative and printing needs.

Our roll media and coloured vinyl are designed to enhance your projects, making them stand out and leave a lasting impression.

Roll media is engineered to provide outstanding printing results across a variety of applications. Whether you're producing banners, posters, signs, or other large-format prints, roll media offers superior quality, ensuring sharp and vibrant images.

Whether you're looking for signage, vehicle or architectural wrap, window film or floor graphics - we've got it covered.


Technical information

  • General
    Description Norm Unit Value
    Density ISO 1183 g/cm³ 1.6
    Moisture absorption in normal climate - % <0.18
    Fire behavior DIN 4102 - -
    Specific heat capacity - kj/Kg°C -
  • Mechanical
    Description Norm Unit Value
    Tensile strength DIN 53455 N/mm 90
    Stretch to break DIN 53455 % 5
    E-Modulus DIN 53457 (23 °C) N/mm²  6000
    Flexural strength DIN 53452 N/mm²  -
    Impact strength DIN 53453 (23 °C) Charpy -
    Shore or ball pressure hardness - Shore °D -
    Coefficient of friction - - -
  • Electrical
    Description Norm Unit Value
    Relative electrical constant DIN 53485 (100Hz) 100Hz 4.4
    Dielectric loss factor DIN 53483 (100Hz) tan (..x10-³ 0.022
    Specific resistance DIN 53482 16 Ω cm 10
    Surface resistance DIN 53482 13 Ω 10
    Creep current resistance DIN 53480 KC -
    Breakdown voltage DIN 53481 kV/mm 28
  • Thermal
    Description Norm Unit Value
    Crystalline melting point - °C 285
    Thermal conductivity DIN 52162 W/m°K 0.36
    Linear expansion coefficient DIN 53762 mm/m°C 0.025
    Long-term operating temperature without load - °C -50 / 250
    Maximum short-term use temperature - °C 300
    Heat shape resistance DIN 53461 °C 260
  • Temperature range
    Minimum temperature Maximum temperature
     -20°C  +115°C

Processing data

  • Circular sawing
    Clearance angle (α) 15 - 30 [o]
    Rake angle (λ) 0 - 5 [o]
    Cutting speed 500 - 800 [m/min]
    Tooth spacing 3 - 5 [mm]
  • Band sawing
    Clearance angle (α) 15 - 30 [o]
    Rake angle (λ) 0 - 5 [o]
    Cutting speed 500 - 800 [m/min]
    Tooth spacing 3 - 5 [mm]
  • Drilling
    Clearance angle (α) 3 - 10 [o]
    Rake angle (λ) 10 - 30 [o]
    Top angle (φ) 90 [o]
    Cutting speed 40 - 200 [m/min]
    Start 0.1 - 0.3 [mm/rev]
  • Turning
    Clearance angle (α) 5 - 8 [o]
    Rake angle (λ) 0 - 5 [o]
    Setting angle (χ) 45 - 60 [o]
    Cutting speed 200 - 500 [m/min]
    Start 0.1 - 0.3 [mm]
  • Milling
    Clearance angle (α) 5 - 15 [o]
    Rake angle (λ) 5 - 15 [o]
    Cutting speed 250 - 500 [m/min]
    Start 0.2 - 0.5 [mm/rev]